Tag

TWP 1500 Instructions

Official Help Site for TWPStain.com

posted by TWP Help 529 Comments

Welcome to the official help site for TWPStain.com. TWP Total Wood Preservative is an EPA registered wood preservative for decks, fences, gazebos, cedar siding, wood shakes, log homes, outdoor furniture, and other exterior wood surfaces. TWP wood preservative offers outstanding protection from UV fading, wood rot, water damage, and mildew for all types of wood species.

The TWP stain help site is designed for exterior wood and deck owners looking for solutions to their wood maintenance questions. We have gathered information based on years of experience. From TWP stain tips and wood maintenance advice to prepping new wood and how to articles we will guide you through step by step to achieve professional like results using any of the TWP wood preservative products.

Please read our articles and feel free to ask any questions that you may have about restoring your exterior wood or decking surfaces. The information you need regarding wood and deck restoration and TWP deck stains are all here. Please enjoy and remember that we are here to help.

 

TWP Stain Wet on Wet Application

posted by TWP Help 331 Comments

How to Apply TWP Wet on WetTWP Stains are to be applied "Wet on Wet" when the wood is absorbent enough to handle more than 1 coat of the stain. This is typically for wood and decking that is older than 12 months and has been exposed to the elements. Applying the TWP "wet on wet" is similar to applying 1.5 coats of stain. The second coat covers twice as much square footage as the first coat.

Applying TWP "wet on wet" is very easy and not complicated once you understand the simple steps. Continue Reading

 

How To Apply TWP 1500 Stain

posted by TWP Help 477 Comments
TWP 1500 Stain

TWP 1500 Stain

First, measure your wood surface to determine the square footage. TWP 1500 Series Wood and Deck Preservative covers approximately 150-300 sq. ft. per gallon. Buy a little more stain than you need just to be sure you do not run out at the end of the project.

Prior to using TWP 1500 Deck Stain, clean the wood using a brush or pressure washer along with a quality wood cleaner. Preparing the wood properly will ensure your new TWP Wood Stain will perform optimally.

Once the wood surface is cleaned it must dry for a minimum of 48 hours before ant stain can be applied. Be sure the temperature is at least 50 degrees and that dry weather is forecasted for the next several days. Continue Reading

 

Best Results with TWP Stains

posted by TWP Help 16 Comments

How to Achieve Great Results with TWP Stains

When completing any exterior staining project you can achieve the best results by using a quality product and having the right knowledge. TWP wood stain will give you the best results possible but there are some general tips that can make the final results that much better.

One vital step that a lot of homeowners skip over is wood prep. Preparing the wood for the new stain is extremely important. Skipping this step will not allow the TWP wood stain to perform as it should thus shortening its performance and longevity. Continue Reading

 

Stain All Sides with TWP?

posted by TWP Help 85 Comments

Stain All Sides of the deck board with TWP?

When staining a deck using TWP, is it necessary to stain all sides of each board? Consider the reason for staining wood - to shield it from weather damage, which causes rot and decay. This can lead to an unsightly appearance and structural failure.

Wood that is exposed to the elements will experience constant changes. Wood swells as it absorbs water and moisture, then shrinks when it dries out. These constant changes begin to break down the cellular structure of the wood causing it to crack, split, and warp. Ultraviolet rays fade and discolor the wood leading to a neglected appearance.
Continue Reading

 

Application Instructions for TWP Stains

posted by TWP Help 46 Comments

You have made the decision to use TWP wood preservatives to ensure the lasting beauty of your exterior wood surfaces. By using TWP deck stain and following some helpful guidelines you can get professional like results.

Before applying TWP wood stain it is important that the wood is cleaned and prepped correctly so the stain will perform as expected. Clean the wood using a wood cleaner and a stiff brush or pressure washer to agitate the wood and remove any unwanted contaminants. We recommend using a product like the Gemini Restore-A-Deck Kit. This is a two part deck restoration system containing a deck cleaner and brightener that is extremely effective and eco-friendly. Continue Reading