Tag

TWP Stain Near Me

Rain Before and After TWP Stain Application

posted by TWP Help 12 Comments

TWP-Stain-Official-Dealer-SmallWhen taking on a deck staining project there are a few important factors to consider. One of which is weather. Rain is probably the biggest factor when staining a deck with TWP or any stain for that matter. Ideally, you will want to check the weather several days in advance before starting your project. Be sure there is not rain forecasted for the next several days. Prior to applying TWP Stain you will want to wash the wood using a quality wood cleaner followed by a wood brightener product. This will clean the surface of the wood and prepare it for the new stain. Continue Reading

 

The TWP Guide to Staining a Deck

posted by TWP Help 10 Comments

How To TWP Guide to Staining a Deck

Prolonging the life of a deck is not difficult if you know enough about deck care and regular maintenance. Every year or two most decks need to be cleaned and recoated with deck stain. This will not only enhance the natural beauty of the wood but will create a barrier of protection from Mother Nature. Once a deck has been prepped (See article: The TWP Guide to Prepping a Deck) it is then ready for a coat of TWP stain. This guide will help you along in getting a professional like finish.

Stain Application Tools

Continue Reading

 

Dry and Curing Time of TWP Wood Deck Stains

posted by TWP Help 6 Comments

TWP 1500 SeriesIt is good to know the dry and curing time of TWP (Total Wood Preservative) Stain prior to applying. Some people get in too big of rush and want to start putting furniture, plants, grills, etc. back onto a wood surface too soon after staining. It is best to allow TWP to fully dry and cure before allowing foot traffic and items to be placed on the surface.

Drying and curing time for TWP may vary depending on climate and weather conditions. Over application can also affect dry and curing times. TWP should dry evenly flat with no glossy areas. Glossy areas indicate over application of the product and will extend the dry and curing time of TWP. To avoid over applying TWP, allow the stain to soak into the bare wood for 30 minutes then wipe away or back brush any excess stain that has not penetrated the surface. Do not apply TWP if rain is expected within 48 hours. TWP can withstand light rain within an hour or so of being applied but it is best to wait for dry conditions prior to staining. Continue Reading