Tag

TWP is Shiny

TWP Stain is Spotty or Shiny

posted by TWP Help 68 Comments

TWP Stain Application is Spotty/Shiny | How to Fix

Staining a deck can be a challenge. There are some common mistakes that can occur that may greatly affect the final results. One such common mistake is over applying the stain.

With TWP Stain it is recommended to apply the stain using a brush, roller, or some type of sprayer. If the wood seems very thirsty, you can apply two “wet on wet” coats. TWP is a penetrating stain so you should never apply more stain than the wood can absorb. Once the stain as had 10 minutes or so to penetrate into the wood, you should go back and wipe away or back brush any puddles, drips, or runs.
Continue Reading

 

It Rained on my TWP | How to Fix

posted by TWP Help 3 Comments

It Rained on my TWP | How to Fix

When applying stain to an exterior surface, it can be a battle with Mother Nature to find an adequate weather window. With TWP Wood Preservative it should not rain within 12 hours after applying. The stain may not be affected by a little rain especially if it has soaked into the wood already. But in the case of significant rain, it can have an effect on the stain’s appearance.

If it rained on your TWP and you want to know how to fix it here are some tips. After getting rained on still allow the surface to dry for at least 24 hours. Only then will you be able to see the extent of the damage. Because water and oil do not mix, the rain may not affect the appearance as badly as you think.
Continue Reading