What is the Best TWP Stain for Ipe and Hardwood Decking – TWPStainHelp.com
Ipe and other hardwood decking are commonly used for exterior projects for their natural beauty. The denser wood holds up well in many different climates. But like other wood types, Ipe and hardwood decking should be finished with a weather resistant coating. This ensures a longer lifespan and enhanced appearance.
The best TWP Stain for Ipe and hardwood decking is the 100 series where available. The higher VOC levels of the 100 series, restricts it from being sold in all states although it is an EPA registered wood preservative. TWP 100 Series stain is ideal for dense woods like Ipe. It has an exceptional absorption rate to prevent UV discoloration and moisture damage.
The TWP 100 Series is available in 6 colors all of which will enhance the natural beauty of exotic hardwood decking. 100 Series is not prone to mold or mildew like other stains, which can cause wood rot and structural damage. Only 1 coat should be applied to IPE and other Exotic Hardwood stains. The Rustic color is most popular for IPE Wood and Decking.
Where TWP 100 Series is not available the next best TWP Stain for Ipe and hardwood decking is the 1500 Series formula. TWP 1500 is compliant in all 50 states due to a low 250 VOC level and is also an EPA registered wood preservative. This easy to apply TWP is available in 9 different colors to give you the look you want.
TWP 1500 Series Wood Stain penetrates dense woods to lock out moisture and harmful ultraviolet rays. It contains mildewcides that help prevent fungi and mildew growth. Its ease of application and maintenance will ensure you enjoy your hardwood surfaces for many years.
For any Ipe or hardwood decking surface, try either TWP 100 or 1500 Series deck stain. Both are excellent for enhancing the wood’s natural beauty and providing adequate weather protection. Using the best TWP stain for Ipe and hardwood decking will guarantee you the most protection for your investment.
We had our deck finished with TWP 100 stain and have noticed that it gets scratches on it quite easily. Is there something we can put over the stain to stop the scratching?
Sorry but no, TWP cannot be top coated.
Can you use TWP 1500 Clear on IPE Wood? Does it work well? Our stainer used this and it only held up for two/two and half months. It did not last at all… Thanks for your help!
No. The clear does not provide UV protection. Use Rustic color. IPE requires annual maintenance.
Ok. Thank you! What if the client does not want to use a tint/color? Should a different product/brand be used?
No clear (no color) will provide any UV protection. Does not matter the brand of stain.
Sorry, do you mean Not using a color will NOT provide any UV protection regardless of brand? Or it WILL provide protection? Thanks for your help so far!
No pigment (100% clear) = no UV protection. Does not matter the brand.
Two questions:
1) Can I use 200 series stain like California cedar on Ipe? I was thinking it would last longer than 100.
2) Can I stain over a deck that has an old coat of messmers uv hardwood stain?
Thx!
1. No. It will not soak into IPE. IPE requires an annual application. Nothing will last longer.
2. No. The Messmers will need to be stripped first.
For #2, are you saying it will or won’t need to be stripped? Thx.
Sorry, typo.
2. No. The Messmers will need to be stripped first.
Can you use TWP on Tigerwood?
Yes but only 1 very light coat.
in Arkansas and I have some eucalyptus outdoor furniture – can I use the 100 series wet on wet ? Thanks!
Just one coat for this type of wood. Wipe off any excess that does not soak in after 40 minutes.
Try wiping with rags and mineral spirits. Saturate all oil rags in water and lay flat to dry in the sun.
We used 1516 on Ipe after RAD prep, 36 hours of hot, dry, windy, weather, following wet on wet and wiped off excess. 24 hours after staining, the boards in direct sunlight are bubbling, seemingly from the checks. I went back over and wiped off what I could. Is there anything else I can do to mitigate this?